ACE Fix Gold
High performance cementitious tile adhesive (latex modified)
Product overview
ACE FIX GOLD is a ready-mix, cement-based, polymer (latex) modified tile adhesive for internal and external use, with a strong bonding effect suited to large tiles and permanent exposure to high humidity. It is non-sagging and classified ‘T’ (slip resistant) under EN 12004 for tile adhesives in the UAE, and can be used in damp environments with full water resistance.
ACE FIX GOLD includes a Low Dust feature, unique to this product in the UAE, reducing dust generated during pouring and mixing by 90% for a cleaner working site and easier renovation.
Where to use it
Suitable substrates
- Concrete
- Lightweight blocks
- Stone walls (cleaned and prepared)
- Tiles (internal use)
- Cementitious plaster and renders
- Gypsum board (primer required)
- Polystyrene board fixed to concrete or cementitious substrate
Over difficult substrates such as cement board, gypsum, or wood, a primer is required — consult us for advice.
Suitable applications
- Private swimming pools (≤80m³)
- Bathrooms
- Stairs
- Heated floors
- Facades
- Rooms
- Parking
Technical characteristics
| Appearance | Powder |
|---|---|
| Composition | Cement, siliceous sand and additives |
| Color | Grey or White |
| Powder density | 1.20 ± 0.05 |
| Paste density | 1.55 ± 0.05 |
| Open time | 25 minutes at 20°C |
| Pot life | 2 hours at 20°C |
| Wetting capability at 10 min | 90% |
| Transfer at 20 min | 85% |
General data
| Shelf life | 12 months |
|---|---|
| Mixing ratio | 5 to 6 L per 25 kg bag / 4 to 4.8 L per 20 kg bag |
| Resistance to bacterial growth (ANSI 118 & 108 A) | Pass — no evidence of bacterial growth |
| Coverage | 3 to 7 kg/m², depending on trowel notch size and substrate flatness |
| Service temperature | -20°C to +70°C |
| VOC and formaldehyde content (ISO/FDIS 11890-2/GC-MS) | None (<10µg/l) |
Independently tested performance
EN 12004:2007 — open time by tensile adhesion
| After 5 minutes | 1.2 N/mm² |
|---|---|
| After 20 minutes | 0.56 N/mm² |
EN 1348:2007 — bond strength
| Initial, after 28 days standard conditions | 2.0 N/mm² |
|---|---|
| After water immersion | 1.0 N/mm² |
| After heat exposure | 2.1 N/mm² |
| After freeze-thaw cycles | 1.1 N/mm² |
All bond strength values carry a ±10% tolerance.
ANSI A118.4:2012 — shear strength
| 7 days, standard conditions | 1.4 N/mm² |
|---|---|
| 28 days, standard conditions | 1.9 N/mm² |
Applicable standards
- BS 5980:1980
- EN 12004:2007
- ANSI A118.4
Additional technical data
| Dry solids content | 100% |
|---|---|
| pH of mix | > 12 |
| Application temperature range | +5°C to +40°C |
| Adjustability time | 50 minutes |
| Set to light foot traffic | 24 hours |
| Ready for use | 15 days |
| Resistance to alkalis | Excellent |
| Resistance to oils | Excellent (poor with vegetable oil) |
| Resistance to solvents | Excellent |
| Wall grouting, time after tiling | 5 to 8 hours |
| Floor grouting, time after tiling | 24 hours |
How to use it
Surface preparation
Surface must be clean and free from grease or dust, and sufficiently cured so shrinkage has already occurred. Lightly moisten a dry substrate before application — never moisten the tiles.
Mixing
Mix with 5 to 6 L of clean, cool water per 25 kg bag (4 to 4.8 L per 20 kg), using a low-speed electric mixer (under 300 rpm) until a uniform, lump-free paste forms. Let the paste rest briefly before use.
Application
Apply evenly with a notched trowel for a uniform thickness of 2 to 3 mm minimum. Press tiles firmly so paste does not slip from the tile sides. Work in areas of around 1 m² and tile within 25 minutes of application at 20°C, before a skin can form. Leave at least 2 mm around each tile, and wait at least 24 hours before grouting.
Safety
Contains cement powders that release alkalis when mixed with water, which can be harmful to skin. Apply in a ventilated area with protective gear for hands, eyes, and respiratory system, and avoid breathing the dust. Wash skin splashes with soap and water; rinse eyes thoroughly with clean water if exposed. Seek medical attention if swallowed — do not induce vomiting. The product is non-flammable.
Need ACE Fix Gold for your project?
Request a quoteTechnical characteristics are provided for guidance. Application conditions vary by site — confirm suitability with our team before specifying.
